Надіслати цю статтю Особливості контактної взаємодії і зношування тонкостінних елементів конструкцій
Анотація
Розглянуто контактні задачі для тонкостінних елементів конструкцій і їхнього зношування. Запропоновано єдину методику розв’язування задач, яка базується на зведенні до інтегральних рівнянь Вольтерра. Це дає змогу виявити особливості розв’язків залежно від гіпотез, які характеризують деформування тонкостінного елемента. Наведено розв’язки та аналіз задач зношування пластин жорстким штампом, гарячим штампом, з урахуванням фрикційного розігріву, з урахуванням зміни товщини пластини у процесі зношування.
Зразок для цитування: О. В. Максимук, “Особливості контактної взаємодії і зношування тонкостінних елементів конструкцій,” Мат. методи та фіз.-мех. поля, 63, No. 1, 133–148 (2020), https://doi.org/10.15407/mmpmf2020.63.1.133-148
Translation: О. V. Maksymuk, “Specific features of the contact interaction and wear of thin-walled structural elements,” J. Math. Sci., 270, No. 1, 157–175 (2023), https://doi.org/10.1007/s10958-023-06338-9
Ключові слова
Посилання
V. M. Aleksandrov, G. K. Annakulova, “Contact problem of thermoelasticity with regard for wear and heat release caused by friction,” Friction and Wear, 11, No. 1, 24–28 (1990).
V. M. Aleksandrov, S. M. Mkhitaryan, Contact Problems for Bodies with Thin Coatings and Interlayers, Nauka, Moscow (1983).
V. M. Aleksandrov, M. I. Chebakov, Introduction into Contact Mechanics [in Russian], Izd. OOO TsVVR, Rostov-on-Don (2005).
A. A. Amirjanyan, A. V. Sahakyan, “On indentation of a n-shaped rigid punch into an elastic half-space with regard for the forces of sliding friction and adhesion,” Izv. Nats. Akad. Nauk Armenii. Mekhanika, 66, No. 3, 3–11 (2013).
A. Ye. Andreikiv, M. V. Chernets, Evaluation of contact interaction of the machine’s rubbing details [in Russian], Nauk. Dumka, Kiev (1991).
Yu. P. Artyukhin, One-dimensional contact problems in the theory of shells,” Izv. Akad. Nauk SSSR, Mekh. Tv. Tela, No. 3, 55–65 (1981).
V. V. Aulin, V. M. Bobrytskyi, “Computer modeling of temperature fields and stresses in composite materials and coatings at their formation, friction and wear,” Zb. Nauk. Prats’ Kirovogradsk. Nats. Tekhn. Univ.: Machinery in agriculture production, industry engineering, automation, Issue 27, 236–245 (2014).
M. V. Blokh, “Choice of the model in problems of contact between thin-walled bodies,” Prikl. Mekh., 13, No. 5, 34–42 (1977); English translation: Sov. Appl. Mech., 13, No. 5, 449–455 (1977), https://doi.org/10.1007/BF00901799
A. A. Bobylev, I. S. Belashova, S. D. Kuz’min, “Contact problem on indentation of a convex punch into functionally graded coating by given force,” Vestn. Mosk. Aviats. Inst., 21, No. 3, 151–160 (2014) (in Russian).
F. P. Bowden, D. Tabor, The Friction and Lubrication of Solids [in Russian], Mashinostroenie, Moscow (1968).
N.D. Vaisfel’d, “Collision of an elastic finite-length cylinder with a rigid barrier,” Prikl. Mekh., 43, No. 9, 74–82 (2007); English translation: Int. Appl. Mech., 43, No. 9, 1009–1016 (2007), https://doi.org/10.1007/s10778-007-0100-0
A. B. Vasilyeva, N. A. Tikhonov, Integral Equations [in Russian], Fizmatlit, Moscow (2002).
I. N. Vekua, Some General Methods of Constructing Various Variants of the Shell Theory [in Russian], Nauka, Moscow (1982).
A. F. Verlan, V. S. Sizikov, Integral Equations: methods, Algorithms, Programs [in Russian], Nauk. Dumka, Kiev (1986).
L. A. Galin, Contact problems of the theory of elasticity and viscoelasticity [in Russian], Nauka, Moscow (1980).
G. H. Golub, Ch. F. van Loan, Matrix computations [in Russian], Mir, Moscow (1999).
I. G. Goryacheva, Mechanics of Friction Interaction [in Russian], Nauka, Moscow (2001).
Grigolyuk È. I., V. M. Tolkachev, Contact Problems of the Theory of Plates and Shells [in Russian], Mashinostroenie, Moscow (1980).
Ya. M. Grigorenko, A. T. Vasilenko, I. G. Emelyanov, B. L. Pelekh, A. V. Maksymuk, Statics of structural elements [in Russian] (ed. Ya. M. Grigorenko), Mechanics of Composites (in 12 volumes), Vol. 8, A.S.K., Kyiv (1999).
Ya. M. Grigorenko, N. N. Kryukov, “Solution of problems of the theory of plates and shells with spline-functions (survey),” Prikl. Mekh., 31, No. 6, 3–27 (1995); English translation: Int. Appl. Mech., 31, No. 6, 413–434 (1995). https://doi.org/10.1007/BF00846794
D. V. Grilitskii, V. I. Pauk, “A contact problem for a thick rough layer with regard for wear and heat generation,” Fiz.-Khim. Mekh. Mater., 25, No. 3, 78–83 (1989); English translation: Sov. Mater. Sci., 25, No. 3, 305–310 (1989), https://doi.org/10.1007/BF00726231
A. N. Guz’, V. B. Rudnitskii, Fundamentals of the Theory of Contact Interaction of Elastic Bodies with Initial (Residual) Stresses [in Russian], PP Melnik, Khmelnitskii (2006).
K. Johnson, Contact Mechanics [in Russian], Mir, Moscow (1989).
O. V. Zakalov, I. O. Zakalov, Fundamentals of Friction and Wear in Machines [in Ukrainian], Vyd. Ternop. Nats. Tekhn. Univ. Im. I. Pulyuja, Ternopil’ (2011).
G. S. Kit, M. G. Krivtsun, Plane Problems of Thermoelasticity for bodies with cracks [in Russian], Naukova Dumka, Kiev (1983).
G. S. Kit, A. V. Maksimuk, “Wear of thin-walled structural elements of composite materials with regard for thermal effects,” Mekh. Kompoz. Mater., 35, No. 3, 309–318 (1999); English translation: Mech. Compos. Mater., 35, No. 3, 213–222 (1999), https://doi.org/10.1007/BF02257251
G. S. Kit, A. V. Maksymuk, “The method of Volterra integral equations in contact problems for thin-walled structural elements,” Theor. Prikl. Mekh., Issue 27, 29–35 (1997); English translation: J. Math. Sci., 90, No. 1, 1863–1867 (1998), https://doi.org/10.1007/BF02432827
B. V. Kopey, Maksymuk A. V., N. N. Shcherbyna, “Analysis of contact stresses in structural joints of composite shell with steel banding,” Mekh. Kompoz. Mater., 36, No. 1, 109–120 (2000); English translation: Mech. Compos. Mater., 36, No. 1, 67–74 (2000), https://doi.org/10.1007/BF02681779
I. V. Kragelskij, M. N. Dobychin, V. S. Kombalov, The Bases of Calculations of Friction and Wear [in Russian], Mashinostroenie, Moscow (1977).
V. D. Kubenko, V. V. Gavrilenko, Ya. A. Zhuk, “Non-stationary contact problem of the theory of elasticity (consistent and non-consistent surfaces),” Methods for Solution of Applied Problems of Mechanics of Deformable Solids, Issue 10, 162–178 (2009) (in Russian).
A. G. Kuzmenko, Reliability of Friction Nodes in terms of Strength and Wear [in Russian], Khmelnitsk. Nats. Univ., Khmelnyts’k (2011).
R. М. Kushnir, V. S. Popovych, H. Yu. Harmatii, “Analytic-numerical solution of contact problems of thermoelasticity for thermosensitive bodies,” Fiz.-Khim. Mekh. Mater., 37, No. 6, 39–44 (2001); English translation: Mater. Sci., 37, No. 6, 893–901 (2001), https://doi.org/10.1023/A:1015641107241
R. М. Kushnir, V. S. Popovych, B. V. Protsyuk, “On the development of investigations of the thermomechanical behavior of thermally sensitive bodies,” Mat. Met. Fiz.-Mekh. Polya, 59, No. 3, 7–27 (2016); English translation: J. Math. Sci., 236, No. 1, 1–20 (2019), https://doi.org/10.1007/s10958-018-4094-4
V. M. Maksymovych, A. Yu. Kotsiuba, S. V. Lavrenchuk, Plane Contact Problems of the Theory of Elasticity for Bodies of Complex Shape [in Ukrainian], Luts’k. Nats. Tekhn. Univ, Luts’k (2012).
O. V. Maksimuk, “On the problem of wear of thin anisotropic plates,” Mat. Met. Fiz.-Mekh. Polya, 40, No. 3, 125–128 (1997); English translation: J. Math. Sci., 96, No. 1, 2907–2910 (1999), https://doi.org/10.1007/BF02169005
O. V. Maksymuk, “Dependence of wear of anisotropic plates on their thickness,” Fiz.-Khim. Mekh. Mater., 36, No. 4, 117–119 (2001); English translation: Mater. Sci., 36, No. 4, 620–624 (2000), https://doi.org/10.1023/A:1011342928411
O. V. Maksymuk, “Mathematical model for wear of anisotropic plates by a hot die,” Problems of Tribology, Issue 5, 53-60 (1997) (in Ukrainian).
O. V. Maksymuk, “One variant of the theory of transversely isotropic plates with variable thickness,” Mat. Met. Fiz.-Mekh. Polya, 43, No. 1, 130–136 (2000) (in Ukrainian).
O. V. Maksymuk, R. M. Makhnitskyi, and N. M. Shcherbyna, Mathematical Modeling and Methods for the Numerical Analysis of Thin-Walled Composite Structures [in Ukrainian], Pidstryhach Institute for Applied Problems in Mechanics and Mathematics, Ukrainian National Academy of Sciences, Lviv (2005).
R. M. Martinyak, R. M. Shvets’, “A mathematical model of mechanical contact of bodies across a thin inhomogeneous layer,” Mat. Met. Fiz.-Mekh. Polya, 40, No. 2, 107–109 (1997); English translation: J. Math. Sci., 90, No. 2, 2000–2002 (1998),
V. I. Mossakovsky, V. S. Gudramovich, Ye. M. Makeev, Contact Problems of the Theory of Shells and Beams, Mashinostroenie, Moscow (1978).
N. K. Myshkin, M. I. Petrokovets, Friction, Lubrication, Wear. Physical Foundations and Technical Applications of Tribology [in Russian], Fizmatlit, Moscow (2007).
O. V. Nakhaichuk, A. A. Mizrakh, N. O. Pukhtits’ka, V. I. Muzychuk, “Study of friction effect on stressed state in indentation of rounded indenter,” Problems of Tribology, 78, No. 4, 11-16 (2015) (in Ukrainian).
V. I. Ostrik, “Axisymmetric contact of a punch of polynomial profile with an elastic half-space when there is friction and adhesion,” Prikl. Matem. Mekh., 77, No. 4, 605–619 (2013); English translation: J. Appl. Math. Mech., 77, No. 4, 433–444 (2013), https://doi.org/10.1016/j.jappmathmech.2013.11.012
V. I. Ostrik, Contact Mechanics [in Ukrainan], VPTs “Kyiv. Univ”, Kyiv (2015).
V. V. Panasyuk, M. Yo. Teplyi, Some Contact Problems of Elasticity Theory [in Ukrainan], Naukova Dumka, Kyiv (1975).
B. L. Pelekh, A. V. Maksymuk, I. M. Korovaichuk, Contact Problems for Layered Structural Elements and Bodies with Coatings [in Russian], Naukova Dumka, Kyiv (1988).
Ya. S. Pidstryhach, Selected Works [in Ukrainian], Naukova Dumka, Kyiv (1995).
I. M. Pistunov, Nodes of Sliding Friction. Models and Optimization, Nats. Hirn. Univ, Dnipropetrovs’k (2009).
Yu. M. Podil’chuk, V. F. Tkachenko, Ya. I. Sokolovskii, Thermoelastic contact problem on the penetratiion of a transvetsely isotropic half-space by a heated die elliptic in plan,” Prikl. Mekh., 32, No. 11, 38–45 (1996); English translation: Int. Appl. Mech., 32, No. 11, 851–857 (1996), https://doi.org/10.1007/BF02086659
Ya. S. Podstrigach, Yu. M. Kolyano, Unsteady Temperature Fields and Stresses in Thin Plates [in Russian], Naukova Dumka, Kiev (1972).
Ya. S. Podstrigach, R. N. Shvets, Thermoelasticity of Thin Shells [in Russian], Naukova Dumka, Kyiv (1978).
S. V. Poltavchenko, “Modeling of wear-resistant elements with coatings,” Tr. Odessk. Politekhn. Univ., No. 1(25), 32–36 (2006) (in Ukrainian).
G. Ya. Popov, V. M. Tolkachev, “Contact problem of rigid bodies with thin-walled elements,” Izv. Akad. Nauk SSSR. Mekh. Tv. Tela, No. 4, 192–206 (1980) (in Russian).
V. L. Rvachev, V. S. Protsenko, Contact Problems of Elasticity Theory for Non-classical Domains [in Russian], Naukova Dumka, Kiev (1977).
R. V. Sorokatyi, S. F. Posonskyi, K. O. Dykha, “Modeling of wear-contact parameters for cylindrical sliding guides,” Problems of Tribology, 75, No. 1, 37-43 (2015) (in Russian).
A. F. Ulitko, V. I. Ostryk, “Frictional contact of a rigid cone with elastic half space,” Mat. Met. Fiz.-Mekh. Polya, 55, No. 4, 106–116 (2012); English translation: J. Math. Sci., 198, No. 2, 132–146 (2014), https://doi.org/10.1007/s10958-014-1778-2
H. Chihos, System Analysis in Tribonics [in Russian], Mir, Moscow (1982).
A. V. Chichinadze, È. M. Berliner, È. D. Braun, Friction, Wear and Lubrication (Tribology and Tribotechniques) [in Russian], Mashinostroenie, Moscow (2003).
J. R. Barber, “Some thermoelastic contact problems involving frictional heating,” Quart. J. Mech. Appl. Math., 29, No. 1, 1–13 (1976), https://doi.org/10.1093/qjmam/29.1.1
M. Ciavarella, N. Menga, “A note on wear of elastic sliding parts with varying contact area,” J. Mech. Mater. Struct., 10, No. 3, 255–264 (2015), https://doi.org/10.2140/jomms.2015.10.255
C. Ciulcu, T.-V. Hoarau-Mante, M. Sofonea, “Viscoelastic sliding contact problems with wear,” Math. & Comput. Model., 36, No. 7-8, 861–874 (2002), https://doi.org/10.1016/S0895-7177(02)00233-9
I. Çömez, “Frictional contact problem for a rigid cylindrical stamp and an elastic layer resting on a half plane,” Int. J. Solids Struct., 47, No. 7-8, 1090–1097 (2010), https://doi.org/10.1016/j.ijsolstr.2010.01.003
F. Erdogan, M. A. Güler, Contact Mechanics of FGM Coatings, Lehigh Univ., Bethlehem (2000).
Fundamentals of Friction: Macroscopic and Microscopic Processes (eds. I. L. Singer, H. Pollock), NATO ASI Ser. E, Vol. 220, Kluwer Acad., Dordrecht (1992).
N. Gray, “Automatic reduction of elliptic integrals using Carlson’s relations,” Math. Comput., 71, No. 237, 311–318 (2202), https://doi.org/10.1090/S0025-5718-01-01333-3
D. A. Hills, D. Nowell, A. Sackfield, “The state of stress induced by cylindrical sliding contacts with frictional heating,” Int. J. Mech. Sci., 32, No. 9, 767–778 (1990), https://doi.org/10.1016/0020-7403(90)90027-G
K. Holmberg, A. Matthews, Coatings Tribology: Properties, Mechanisms, Techniques and Applications in Surface Engineering, Elsevier (2009).
K. Holmberg, H. Ronkainen, A. Laukkanen, K. Wallin, “Friction and wear of coated surfaces – scales, modelling and simulation of tribomechanisms,” Surface & Coatings Technology, 202, No. 4-7, 1034–1049 (2007), https://doi.org/10.1016/j.surfcoat.2007.07.105
V. Kahya, A. Birinci, R. Erdol, “Frictionless contact problem between two orthotropic elastic layers,” Int. J. Civil, Architectural, Structural and Construction Eng., 1, No. 1, 7–13 (2007).
H. Kit , O. Maksymuk, “Wear of thin coating of solids with regard for an intermediate layer,” in: Proc. 3rd Int. Symp. on Tribo-Fatigue (ISTF 2000), Beijing, China, Human University Press (2000), pp. 499–503.
L. F. Ma, A. M. Korsunsky, “Fundamental formulation for frictional contact problems of coated systems,” Int. J. Solids Struct., 41, No. 11-12, 2837–2854 (2004), https://doi.org/10.1016/j.ijsolstr.2003.12.022
E. Öner, M. Yaylaci, A. Birinci, “Analytical solution of a contact problem and comparison with the results from FEM,” Struct. Eng. & Mech., 54, No. 4, 607–622 (2015), https://doi.org/10.12989/sem.2015.54.4.607
V. L. Popov, Contact Mechanics and Friction: Physical Principles and Applications, Springer, Berlin etc. (2010).
J. Rojek, J. J. Telega, “Contact problems with friction, adhesion and wear in orthopaedic biomechanics. Part I – General developments,” J. Theor. Appl. Mech., 39, No. 3, 655–677 (2001).
B. Rončević, “Effect of friction on a receding contact between cylindrical indenter, layer and substrate,” Machines. Technologies. Materials, 10, No. 8, 3–6 (2016).
I. A. Soldatenkov, “The periodic contact problem of the plane theory of elasticity. Taking friction, wear and adhesion into account,” J. Appl. Math. Mech., 77, No. 2, 245–255 (2013), https://doi.org/10.1016/j.jappmathmech.2013.07.017
C. Stolz, “Thermodynamical description of running discontinuities: application to friction and wear,” Entropy, 12, No. 6, 1418–1439 (2010), https://doi.org/10.3390/e12061418
M. P. Szolwinski, T. N. Farris, “Mechanics of fretting fatigue crack formation,” Wear, 198, No. 1-2, 93–107 (1996), https://doi.org/10.1016/0043-1648(96)06937-2
S. A. S. Vanini, M. Shahba, N. Kordani, “Numerical investigation of sliding frictional contact in functionally graded steels (FGS),” Mater. Research, 17, No. 6, 1478–1484 (2014), https://doi.org/10.1590/1516-1439.204713
P. Wriggers, Computational Contact Mechanics, Wiley, Chichester (2002).
Посилання
- Поки немає зовнішніх посилань.
Ця робота ліцензована Creative Commons Attribution 3.0 License.